SKILL ALIGN · YEAR 12 · 2027
VCE Foundation Mathematics 2027 — Practice Pack 0 Free Sample
Questions, worked solutions and marking guidance
11 additional independent questions introduce all 8 paid-course topic chapters, with worked support and separate solutions. This representative overview shows course breadth, not full-resource depth or complete syllabus mastery.
Version 1.1 · 11 questions · 33 practice marks · Booklet build: 20261111-02
Independent free sample. These 11 questions and their worked examples are additional to the individual and School resources.
Independent Skill Align practice resource. Curriculum reference: VCAA Mathematics Study Design v1.1 (November 2022), Foundation Mathematics Units 3–4, from 2023 (checked 26 October 2026). This resource is not endorsed by VCAA.
How to use this resource
- This independent overview introduces every paid-course topic chapter at representative depth. Read each chapter's prerequisites and worked support, then attempt its questions before opening Solutions.
- Use the material and performance conditions stated in each question. Record topics you have not studied separately; this sample has no course checks or mixed revision.
- Use the worked solutions below to award one mark per criterion. Accept equivalent mathematically correct working. Carry an earlier numerical error forward where the later method is correct; do not award a mark twice for the same step.
- Record your reasoning, independence and next step for each topic on the review sheet. Use a full resource for further practice, course checks and mixed revision.
Untimed Units 3–4 learning workshops, not a VCE examination simulation. Use a scientific calculator and Foundation formula sheet; a bound reference may support learning. Show estimation, reasoning, units and appropriate precision. Supplied spreadsheet outputs are evidence to interpret. Financial rates/tax tables and operational scenarios are fictional learning assumptions, not current financial advice. Read timing and rounding rules in each task. Different checks do not establish measured improvement or predict a study score. These workshops offer selected applications across the four areas of study. They do not establish exhaustive syllabus depth, hands-on technology proficiency or completion of a school-assessed investigation.
VCAA formula sheet · Approved calculators
Suggested times guide study planning. Questions are grouped for learning; total marks and demand labels do not predict an external examination grade, ATAR or a validated diagnostic score.
Use the working space provided or extra paper labelled with the question reference. Keep your original attempt so you can compare its reasoning with the worked solution below each question.
NUM · Number, estimation and uncertainty
Study design pp.73, 75–76: rational/measurement-irrational numbers, conventions, ratios/proportions, estimation, interval bounds, significant figures, floor/ceiling and percentage error.
Before you start: Number operations, fractions/decimals, percentages and interpreting practical units.
Suggested study time: 35 minutes, including review.
NUM-1 2 marks · Scientific calculator · Calculate, interpret and justify
A billing ledger records a credit as −$17.40. A report must show the floor value in whole dollars. A clerk enters −17. Explain the error and give the correct entry.
Worked solution — NUM-1
- The floor is the greatest integer no greater than −17.40.
- −18 ≤ −17.40 < −17, so the floor is −18; −17 truncates towards zero.
Marking guidance — one mark per criterion — NUM-1
- Places −17.40 between −18 and −17.
- Gives −18 and distinguishes floor from truncation.
Acceptable alternatives — NUM-1
- Credit equivalent exact/appropriately rounded values and other valid algebraic, numerical, graphical or tabular methods that establish the requested evidence. Credit a valid later method using a plausible carried result once, without restoring an earlier lost criterion. Accept other evidence-supported limitations; reject conclusions inconsistent with the supplied units, timing, range or practical constraints.
Common error: NUM-1 — Assuming that removing decimal digits always finds the floor.
Next step: NUM-1 — Place negative values on a number line before applying floor or ceiling.
NUM-2 2 marks · Scientific calculator · Calculate, interpret and justify
Two stores report 160 and 240 returns, each rounded to the nearest ten using round-half-up. Returns are whole numbers. Is a combined total of 410 possible? Establish the greatest possible combined total.
Worked solution — NUM-2
- The first actual count is 155–164 and the second is 235–244.
- The greatest sum is 164+244=408, so 410 is impossible.
Marking guidance — one mark per criterion — NUM-2
- Finds the correct two integer ranges.
- Gives 408 and rejects 410 using the upper limits.
Acceptable alternatives — NUM-2
- Credit equivalent exact/appropriately rounded values and other valid algebraic, numerical, graphical or tabular methods that establish the requested evidence. Credit a valid later method using a plausible carried result once, without restoring an earlier lost criterion. Accept other evidence-supported limitations; reject conclusions inconsistent with the supplied units, timing, range or practical constraints.
Common error: NUM-2 — Treating 165 and 245 as included upper endpoints.
Next step: NUM-2 — Find the real rounding interval, then restrict it to whole counts.
NUM-3 2 marks · Scientific calculator · Calculate, interpret and justify
Two reference volumes are 40 mL and 250 mL. The same dispenser over-delivers by 2 mL in each check. A technician says the percentage errors are equal because the extra volume is equal. Test the claim.
Worked solution — NUM-3
- The first error is 2/40×100=5%; the second is 2/250×100=0.8%.
- Equal absolute errors have different denominators here; the claim is false.
Marking guidance — one mark per criterion — NUM-3
- Calculates 5% and 0.8% against their reference values.
- Explains why equal absolute errors need not give equal relative errors.
Acceptable alternatives — NUM-3
- Credit equivalent exact/appropriately rounded values and other valid algebraic, numerical, graphical or tabular methods that establish the requested evidence. Credit a valid later method using a plausible carried result once, without restoring an earlier lost criterion. Accept other evidence-supported limitations; reject conclusions inconsistent with the supplied units, timing, range or practical constraints.
Common error: NUM-3 — Dividing the error by the measured volume instead of the supplied reference.
Next step: NUM-3 — Label the actual/reference amount before computing a percentage error.
NUM-4 2 marks · Scientific calculator · Calculate, interpret and justify
A sensor reports 8.2 units to the nearest 0.1 using round-half-up. A machine may be restarted only if the true reading is at most 8.24 units. Does the report alone guarantee permission? Give a compatible true reading that supports your conclusion.
Worked solution — NUM-4
- The true reading lies in 8.15 ≤ x < 8.25.
- For example, 8.245 rounds to 8.2 but exceeds 8.24. The report does not guarantee permission; a more precise check is needed.
Marking guidance — one mark per criterion — NUM-4
- States the compatible rounding interval.
- Gives a valid counterexample above 8.24 and rejects the guarantee.
Acceptable alternatives — NUM-4
- Credit equivalent exact/appropriately rounded values and other valid algebraic, numerical, graphical or tabular methods that establish the requested evidence. Credit a valid later method using a plausible carried result once, without restoring an earlier lost criterion. Accept other evidence-supported limitations; reject conclusions inconsistent with the supplied units, timing, range or practical constraints.
Common error: NUM-4 — Comparing only the displayed 8.2 with the limit and ignoring rounding uncertainty.
Next step: NUM-4 — Test the most restrictive permitted reading, not only the display's centre.
ALG · Variation, formulas and practical models
Study design pp.73, 75–76: direct/inverse variation, symbolic expressions, transposition, graphical/algebraic relations, simultaneous equations, break-even and algorithms. Representative topic preview; full resources develop broader applications and depth.
Before you start: NUM, substitution, labelled variables and coordinate meaning.
Suggested study time: 20 minutes, including review.
ALG-S1 3 marks · Scientific calculator · Calculate, interpret and justify
A controller stores x=18 and y=6. Its specification replaces both registers simultaneously, using their old values: x_new=(x+y)/2 and y_new=x−y. A prototype first overwrites x with (x+y)/2, then calculates y from the updated x minus the old y. Find both intended new values and both prototype values. Explain a repair that preserves the specified inputs.
Worked solution — ALG-S1
- The intended simultaneous values are x_new=(18+6)/2=12 and y_new=18−6=12.
- The prototype sets x=12, then y=12−6=6. Store the old x and y, or calculate both new values into temporary registers before overwriting either input.
Marking guidance — one mark per criterion — ALG-S1
- Finds intended pair (12, 12) from old inputs
- Traces prototype pair (12, 6) using its actual update order
- Explains how saved inputs or temporary results preserve simultaneous evaluation
Acceptable alternatives — ALG-S1
- Credit equivalent exact/appropriately rounded values and other valid algebraic, numerical, graphical or tabular methods that establish the requested evidence. Credit a valid later method using a plausible carried result once, without restoring an earlier lost criterion. Accept other evidence-supported limitations; reject conclusions inconsistent with the supplied units, timing, range or practical constraints.
Common error: ALG-S1 — Reading the second formula as though the old x survived the prototype's first assignment.
Next step: ALG-S1 — Label each input old or new, then trace the two assignments before changing the code.
DATA · Collect, summarise and question data
Study design pp.74, 76: data requirements, population/sample, audience, errors/bias, centre/spread including standard deviation/percentiles, cumulative frequency and long-term relative frequencies. Representative topic preview; full resources develop broader applications and depth.
Before you start: Ordered data, denominators, variable types and percentage interpretation.
Suggested study time: 20 minutes, including review.
DATA-S1 4 marks · Scientific calculator · Calculate, interpret and justify
To choose one of three collection days fairly, a program draws a digit 0–9 with equal probability and maps 0–3 to Monday, 4–6 to Tuesday and 7–9 to Wednesday. Find the three selection probabilities. Repair the mapping by rejecting and redrawing only digit 0, and allocating the other digits equally. Explain why uniform digits alone did not make the original day selection fair.
Worked solution — DATA-S1
- The original probabilities are 4/10, 3/10 and 3/10: Monday has one extra digit.
- Reject 0 and redraw; assign 1–3 to Monday, 4–6 to Tuesday and 7–9 to Wednesday. Conditional on an accepted digit, each day has 3/9=1/3 of the outcomes.
- A uniform source does not make groups with unequal numbers of source outcomes equally likely.
Marking guidance — one mark per criterion — DATA-S1
- Finds original probabilities 0.4, 0.3 and 0.3
- Gives disjoint three-digit groups covering 1–9
- Explains redraw and the accepted-outcome probability 1/3
- Relates original unfairness to unequal group sizes rather than unequal digit probabilities
Acceptable alternatives — DATA-S1
- Credit equivalent exact/appropriately rounded values and other valid algebraic, numerical, graphical or tabular methods that establish the requested evidence. Credit a valid later method using a plausible carried result once, without restoring an earlier lost criterion. Accept other evidence-supported limitations; reject conclusions inconsistent with the supplied units, timing, range or practical constraints.
Common error: DATA-S1 — Treating a rejected 0 as an additional Monday outcome, or reporting 3/10 after redraw has removed 0 from accepted outcomes.
Next step: DATA-S1 — List accepted digits under each day and check that every accepted digit appears once.
DISPLAY · Read technology displays and make predictions
Study design pp.74, 76: tables/spreadsheets, pictogram/bubble/Mekko/radar/sunburst/heat-map/stacked-area representations, interpolation, extrapolation, limitations and communication. Representative topic preview; full resources develop broader applications and depth.
Before you start: DATA, explicit display keys, scales, units and distinguishing evidence from inference.
Suggested study time: 20 minutes, including review.
DISPLAY-S1 4 marks · Scientific calculator · Calculate, interpret and justify
Each dot in the supplied fictional display is the time-weighted mean queue during a whole hour: [0,1), [1,2) and [2,3), plotted at each interval's centre. The joined segments are a display aid. Read the middle-hour mean and the line's value at time 1 hour. A caption says the queue never exceeded 30 people. Test it using a possible pair of equal half-hour counts during the middle hour. Explain why the line's value at time 1 is not an observed instantaneous count.
Whole-hour means: blue circles, solid line
| Time (hours) | Mean queue (people) |
|---|---|
| 0.5 | 20 |
| 1.5 | 30 |
| 2.5 | 20 |
Worked solution — DISPLAY-S1
- The middle-hour mean is 30 people. Straight interpolation between the first two centres gives 25 at time 1.
- The middle hour could have 10 people for its first half and 50 for its second: (10+50)/2=30. This matches the hourly mean but exceeds 30, so the caption is not established.
- The dots summarise intervals. Joining their centres does not provide measurements of the queue at each instant between them.
Marking guidance — one mark per criterion — DISPLAY-S1
- Reads the middle-hour mean as 30
- Reads or interpolates the displayed line value 25 at time 1
- Supplies a compatible equal-half-hour counterexample with mean 30 and a count above 30
- Distinguishes interval means and display interpolation from instantaneous observations
Acceptable alternatives — DISPLAY-S1
- Other nonnegative equal-half-hour counts averaging 30, with at least one above 30, are valid; for example 20 and 40. Unequal-duration histories need a correct time-weighted mean. Credit a correct reading of the display while preserving the distinction between interpolated means and unrecorded instantaneous counts.
Common error: DISPLAY-S1 — Treating the largest plotted mean as the largest queue observed at any instant.
Next step: DISPLAY-S1 — Ask what one dot summarises, then construct different within-hour histories with that same mean.
FIN · Personal finance, credit and financial risk
Study design pp.74, 77: investments/loans, debit/credit/debt, rent/mortgage comparisons, debt consolidation, insurance and short/medium/long-term risk. Representative topic preview; full resources develop broader applications and depth.
Before you start: Percentages, cash-flow timing, principal versus interest and stated product assumptions.
Suggested study time: 20 minutes, including review.
FIN-S1 4 marks · Scientific calculator · Calculate, interpret and justify
A fictional policy covers a $350 repair with a $180 excess. Filing this claim pays the repair cost minus the excess, but adds $100 to each of the next two renewal premiums; not filing leaves both premiums at $400. Assume both renewals will occur, no further claims or changes, no discounting and no other costs. The current premium is already paid and identical under both choices. Compare total repair and renewal costs through those two renewals. Does the claim save its whole payout over this horizon?
Worked solution — FIN-S1
- The payout is 350−180=$170, leaving $180 of the repair to pay if claimed.
- Not claiming costs 350+400+400=$1150. Claiming costs 180+500+500=$1180.
- Claiming costs $30 more over this specified horizon: the $170 payout is outweighed by $200 of renewal surcharges. The already-paid common premium is not an additional difference between the choices.
Marking guidance — one mark per criterion — FIN-S1
- Finds payout $170 and retained repair cost $180
- Reconstructs no-claim total $1150
- Reconstructs claim total $1180 including both renewal surcharges
- Compares the same horizon and explains the $30 extra cost rather than treating payout as net saving
Acceptable alternatives — FIN-S1
- An incremental comparison is valid: a $170 receipt versus $200 extra future premiums makes claiming $30 dearer. Including the identical already-paid current premium in both totals preserves this difference. Conclusions apply only to the supplied two-renewal assumptions; no real policy or personal recommendation is established.
Common error: FIN-S1 — Counting the payout as the whole saving while omitting the two specified future premium changes.
Next step: FIN-S1 — Put repair, renewal one and renewal two in separate columns for both choices, then compare the same total costs.
BUS · Tax, business and national or global information
Study design pp.74, 77: personal/business taxation, GST/invoices/BAS, income/expenditure, economic indicators, pay gaps, career interruption, inflation and currency changes. Representative topic preview; full resources develop broader applications and depth.
Before you start: FIN and explicit fictional learning tax/rate tables; no current financial advice.
Suggested study time: 20 minutes, including review.
BUS-S1 4 marks · Scientific calculator · Calculate, interpret and justify
A fictional company has 1000 shares, each priced at $24. A two-for-one share split replaces each old share with two new shares and changes no other ownership or assets. Immediately after that split the price would be $12 per share if total market value were unchanged. Later the new shares trade at $13, with no further share issues. A report compares $24 with $13 and says total market value has nearly halved. Reconstruct the share count and total values, calculate the actual percentage change, and evaluate the report.
Worked solution — BUS-S1
- The split produces 2000 shares; the no-change benchmark is 2000×12=$24000, matching 1000×24.
- At $13 the total is 2000×13=$26000. The change is (26000−24000)/24000×100=8⅓% increase.
- The report compares prices per different-sized ownership units. It must adjust the share count before claiming a change in total market value.
Marking guidance — one mark per criterion — BUS-S1
- Reconstructs 2000 new shares
- Reconciles pre-split $24000 with the $12 no-change benchmark
- Finds later $26000 and an 8⅓% increase
- Explains why comparing unadjusted per-share prices misstates total market value
Acceptable alternatives — BUS-S1
- Credit equivalent exact/appropriately rounded values and other valid algebraic, numerical, graphical or tabular methods that establish the requested evidence. Credit a valid later method using a plausible carried result once, without restoring an earlier lost criterion. Accept other evidence-supported limitations; reject conclusions inconsistent with the supplied units, timing, range or practical constraints.
Common error: BUS-S1 — Keeping the old share count when multiplying the post-split share price.
Next step: BUS-S1 — Pair each quoted price with the number and ownership size of shares to which it applies.
GEO · Transformations, projections and scale
Study design pp.75, 77–78: geometric construction, transformations, similarity, symmetry, projections and 2D/3D plans/models and enlargement/reduction. Representative topic preview; full resources develop broader applications and depth.
Before you start: Coordinates, angle/length conventions, ratio and squared/cubed scale factors.
Suggested study time: 20 minutes, including review.
GEO-S1 3 marks · Scientific calculator · Calculate, interpret and justify
An ideal conical lampshade is made by joining the two straight edges of a quarter-circle paper sector of radius 12 cm. There is no overlap, stretching or seam allowance. The curved sector edge becomes the complete circular base boundary. Using arc length=(angle/360)×2π×sector radius and circumference=2π×base radius, find the base diameter. A maker claims the base radius is 12 cm because that was the paper radius. Explain which cone length the 12 cm actually becomes.
Worked solution — GEO-S1
- The curved edge has length (90/360)×2π×12=6π cm. Therefore 2πr=6π gives base radius 3 cm and diameter 6 cm.
- Each straight sector radius runs from the cone's tip along its surface to the base edge. It becomes the slant length, not the base radius or perpendicular height.
Marking guidance — one mark per criterion — GEO-S1
- Finds curved boundary length 6π cm
- Uses it as base circumference to obtain diameter 6 cm
- Identifies the 12 cm sector radius as the cone's slant length and rejects the maker's claim
Acceptable alternatives — GEO-S1
- Credit equivalent exact/appropriately rounded values and other valid algebraic, numerical, graphical or tabular methods that establish the requested evidence. Credit a valid later method using a plausible carried result once, without restoring an earlier lost criterion. Accept other evidence-supported limitations; reject conclusions inconsistent with the supplied units, timing, range or practical constraints.
Common error: GEO-S1 — Treating the sector radius as the radius of the newly formed base circle.
Next step: GEO-S1 — Track which paper edges are joined and which boundary remains around the open base.
MEASURE · Compound measures, calibration and practical limits
Study design pp.75, 77–78: metric/non-metric and derived quantities, compound perimeter/area/surface area/volume, calibration, tolerance, accuracy and precision. Representative topic preview; full resources develop broader applications and depth.
Before you start: GEO, unit conversion and separating measured precision from calculator digits.
Suggested study time: 20 minutes, including review.
MEASURE-S1 3 marks · Scientific calculator · Calculate, interpret and justify
A stationary board rests entirely on two calibrated scales with no other support. Each scale displays the mass-equivalent of the share it supports; the two shares sum to total mass. Empty-board readings are 1.1 kg and 0.9 kg. With a package on it, readings are 3.2 kg and 4.8 kg. Find the package mass. Moving that same package changes the readings to 2.6 kg and 5.4 kg. Check whether this indicates a mass change and explain why using only the larger scale reading is invalid.
Worked solution — MEASURE-S1
- The empty board totals 1.1+0.9=2.0 kg. Board plus package totals 3.2+4.8=8.0 kg, so the package is 6.0 kg.
- After moving it, 2.6+5.4=8.0 kg again, leaving the same 6.0 kg package mass. Position changes how the two supports share the load; neither individual reading is the whole package mass.
Marking guidance — one mark per criterion — MEASURE-S1
- Combines both empty and loaded readings to obtain package mass 6.0 kg
- Checks that the relocated total remains 8.0 kg and package mass remains 6.0 kg
- Uses the supplied load-sharing rule to reject a single-scale mass conclusion
Acceptable alternatives — MEASURE-S1
- Credit equivalent exact/appropriately rounded values and other valid algebraic, numerical, graphical or tabular methods that establish the requested evidence. Credit a valid later method using a plausible carried result once, without restoring an earlier lost criterion. Accept other evidence-supported limitations; reject conclusions inconsistent with the supplied units, timing, range or practical constraints.
Common error: MEASURE-S1 — Treating a changed individual support reading as a changed total package mass.
Next step: MEASURE-S1 — Draw a boundary around the complete board and package; add all supported shares before subtracting the complete tare.